Diễn đàn Đà KTVBenTre
Trang chủDiễn đànNghe nhạcTìm kiếmLiên hệ
 

:: Quên mật khẩu ::

927 Số bài - 47%
 
Admin
225 Số bài - 11%
 
lct90
196 Số bài - 10%
 
thanhproit
178 Số bài - 9%
 
chauthanh
147 Số bài - 7%
 
heartbeat1992
145 Số bài - 7%
 
meohoanbt
76 Số bài - 4%
 
luyenlvtm88
36 Số bài - 2%
 
titoetn
29 Số bài - 1%
 
baobaounin
19 Số bài - 1%
 
kieutuananhvodoi

Các bài gửi mới nhấtNgười gửi cuối


Share
Fri Jun 29, 2012 10:06 pm#1



xem thêm thông tin
Tổng số bài gửi Tổng số bài gửi : 225
Tham gia : 21/12/2011
Tổng số bài gửi Tổng số bài gửi : 225
Tham gia : 21/12/2011
Bài gửi Brother HL-2140




Tài liệu nước ngoài
Remanufacturing the Brother HL-2140 Toner Cartridge and OPC Drum Unit



  • Specification

    • Up to 22ppm monochrome printing speed
    • First print in under 10 seconds
    • Up to 2400 x 600dpi print resolution
    • Full speed USB 2 connection
    • Up to 250 sheet paper capacity
    • Up to 100 sheet output tray
    • GDI emulation
    • 8MB memory
    • One year on-site warranty (upon registration)
    • Toner cartridge TN-2110 – 1500 pages
    • Toner cartridge TN-2120 – 2600 pages
    • Drum Unit DR2100 – 12,000 pages




    Step 1 – Remanufacturing the toner hopper

    • On the right hand side of the cartridge – remove one screw
    • Using a flat blade screwdriver – leverage out the DVR end cap




    • On the left side of the cartridge take out 3 screws to remove the end plate




    • Reset the Toner page counter




    • On the gear side of the cartridge remove the black plastic DVR roller extender




    • Using a small flat blade screwdriver gently lift out the white DVR retainer – it requires a small inset pin to be released to the right and then pushed in an upwards direction.




    • The DVR roller should be gently lifted away from the cartridge




    • We cleaned the DVR roller first with Iso-propanol alcohol, and then wash with water and allowed to dry




    • In this guide we DO NOT remove the OEM doctor-blade – rather we clean it in place.
    a. To do this, fold a piece of paper in half and slide into the cartridge in order to protect to foam adder roller.
    b. Using a Q-Tip gently wipe the surface of the doctor-blade clean. We used a small amount of Iso-propanol.





    • Once all the cartridge components have been cleaned – replace back into the cartridge.

    • Refilling with AQC Group UK compatible replacement Brother HL-2140 Toner – Using a large flat blade screwdriver gently squeeze between the cartridge bung and the toner hopper and lift out the bung.





    • Replace the protective travel cover





    Step 2 – Remanufacturing the OPC Drum unit DR2100




    • Using a small flat blade screwdriver gently lift out the small circlip





    • Using a small flat blade screwdriver gently lift out the axle stabilizer





    • The OPC unit will now lift out from it’s carriage position




    • The Brother HL-2140 uses a corona wire assembly to charge the OPC drum, this assembly can attract ‘dusting’ of toner particles – clean this assembly with compressed air.




    • Lift out and replace or clean the OPC drum




    • Using either compressed air or vacuum – clean the carriage, transfer roller and drum cleaning brushes, also remove any paper dust.




    • Replace all components

















Chữ Ký
[Click để xem chữ kí của lct90]
Xem lý lịch thành viên


Trả lời nhanh


Chuyển đến:
Trang 1 trong tổng số 1 trang

Khuyến mãi đặc biệt

Múi giờ GMT. Hiện tại là 09:43 AM.



CNTT 2013 Style 2.0. Designed by (KTV) - Exclusive only KTVBenTre - 2013
Powered by: vBulletin version 3.8.0. Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Ghi rõ nguồn "KTV" khi bạn phát hành lại thông tin từ website này.
nước hoa, mỹ phẩm , trang điểm , quà tang, đà lạt, dalat, da lat, kế toán đà lạt, ke toan da lat, hosting, host vietnam, bivn
Free forum | © phpBB | Free forum support | Liên hệ | Report an abuse | Sosblogs


Powered by Forumotion® Version 2
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Designed by chauthanh.1990
Diễn đàn Kỹ Thuật Viên Bến Tre.
Địa chỉ: TP Bến Tre - Bến Tre.
Bạn ơi, đăng ký đi Đăng ký